kiwy S 123 Manual De Instrucciones página 17

The "click" indicates that they are correctly locked into position.
To unlock the safety belt, press the button located on the buckle in a
downward direction.
Tightening the safety harnes (Fig.10).
Pull the harness adjustment strap, at the front of the car seat, until the
harness is a comfortable, snug fit on the child's body.
The safety harness must be tensioned in such a way that it restrains
the child correctly, without constricting or creating discomfort.
Warning: The crotch buckle has a fixed length and cannot be
adjusted. Do not pull on the chest pads.
Loosening the safety harness (Fig.11).
Press the harness release button, at the front of the car seat. (B).
Whilst keeping the button pressed, pull the straps above the
shoulders in a forward direction (A).
The length of the crotch strap is fixed and cannot be adjusted.
Ensure that no parts of the safety harness are twisted.
HOW TO ADJUST THE HEIGHT OF THE SHOULDER STRAPS
Always check the height of the shoulder straps and make sure they
are correctly adjusted at the same level of the shoulders or slightly
above (Fig.12).
The height of the shoulder straps can be adjusted by moving the
backrest of the child car seat in an upward or downward direction.
Adjusting the backrest height (Fig.13).
To raise the shoulder straps: raise the backrest, holding it with the
handle grip located at the top, on the rear of the backrest, until the
shoulder straps are at the height of your child's shoulders.
To lower the shoulder straps: pull the backrest slightly, in an upward
direction and press the backrest adjustment button (A), located at the
top of the backrest.
Whilst keeping the button pressed, lower the backrest, until the
shoulder straps are at the height of the child's shoulders (B).
7