kiwy S 123 Manual De Instrucciones página 16

WARNING! This seat CANNOT be used against the direction of travel.
Use this child seat ONLY for securing your child in your vehicle.
Please always observe your country regulations.
FIXING THE CHILD CAR SEAT - FROM 9 TO 18 KG
(Application range from 9 months to 4 years of age approximately).
Place the child seat on the appropriate vehicle seat (Fig.4).
Make sure that the vehicle's backrest is blocked in the upright
position.
Ensure the vehicle seat in the rearmost position.
Insert the safety belts of the vehicle through the two slots located in
the lower part of the backrest of the child car seat (Fig.5).
Insert the lap and diagonal sections of the car safety belt through the
opening of the belt guide located on the armrest which is closer to
the buckle of the car safety belt (Fig.6).
Fasten the seat belt.
Ensure that none of the parts of the car safety belt are twisted or
trapped and that the cover of the child car seat does not restrict or
prevent the correct movement or fitting of the car safety belt.
Push the child car seat against the backrest of the vehicle seat.
Pull the diagonal section of the safety belt in an upward direction,
until it adheres correctly and the child car seat is safely fixed onto the
car seat (Fig.7).
ADJUSTING THE SAFETY HARNESS
A correctly adjusted harness ensures optimal protection for your
child in the safety seat.
The child car seat has a safety harness with a easy-to-use buckle.
Sit the child into the child car seat (Fig.8).
Fit the straps above the shoulders (A) and the pelvis (B).
The buckle must be positioned between the child's legs (C) .
Locking the safety harnessbuckle (Fig.9).
Join the right connector with the left connector, then insert them into
the buckle, until they click into position.
6