Operating The Appliance - Silvercrest SSMD 300 A1 Instrucciones De Uso

Operating the appliance

1) Place the base 5 on a clean and level
surface .
2) Fill the prepared ingredients in the blender
jug 1 . Always add liquid ingredients before
more solid ingredients, such as fruit and/or
crushed ice .
CAUTION! PROPERTY DAMAGE!
► Never fill the blender jug 1 beyond the MAX
marking (600 ml)! Otherwise, the appliance
cannot mix the ingredients properly!
► Always add at least 100 ml of liquid to the
blender jug 1 when preparing a smoothie .
3) Check that the sealing ring is correctly seated in
the blade holder 4 . Place the blade holder 4
onto the blender jug 1 so that the blade 3
extends into the blender jug 1 and screw the
blade holder 4 firmly in place .
4) Now, place the blade holder 4 along with the
attached blender jug 1 onto the base 5 such
that the arrow on the base 5 is pointing to the
symbol on the blade holder 4 .
CAUTION! PROPERTY DAMAGE!
► To turn the blade holder 4, only hold the
blade holder 4 and never try to turn the
blender jug 1! Otherwise, the blender jug 1
will detach and the ingredients will spill out!
5) Turn the blade holder 4 so that the arrow on
the base 5 points to the
blade holder 4 . The blade holder 4 must
audibly click into place so that it sits firmly
on the base 5 .
NOTE
► The appliance will not start until the blade
holder 4, blender jug 1 and base 5 have
been correctly assembled .
■ 36 │ GB │ MT
symbol on the
6) Insert the plug into a mains power socket .
7) Set the speed switch 6 to the required speed
and wait until the smoothie has reached the
desired consistency .
8) Set the speed switch 6 to "0" .
NOTE
► If the ingredients do not mix properly, it may
be necessary to lift up the appliance and
shake it a little . When doing so, take hold of
the blade holder 4 together with the blender
jug 1 and the base 5 so that they do not
come apart .
CAUTION! PROPERTY DAMAGE!
► Do not operate the appliance for longer
than 1 minute in one session . The appliance
will overheat! After 1 minute's use, allow the
appliance to cool down completely .
CAUTION! PROPERTY DAMAGE!
► To turn the blade holder 4, only hold the
blade holder 4 and never try to turn the
blender jug 1! Otherwise, the blender jug 1
will detach and the ingredients will spill out!
9) When the smoothie is ready, turn the blade
holder 4 until the arrow on the base 5 points
to the symbol on the blade holder 4 and
remove the blade holder 4 with the attached
blender jug 1 .
10) Turn the blender jug 1 over and unscrew the
blade holder 4 .
11) Check that the sealing ring is correctly seated
in the lid 2 and screw the lid 2 onto the
blender jug 1 . You can drink the smoothie
through the drinking opening in the lid 2 .
SSMD 300 A1