Stalgast 9725110 Manual De Instrucciones página 78

Country
FR-BE
DE
ES-IE-GB-GR-IT-PT-
-CZ-SK-SI-LT-LV-CH
EE-FI-DK-SE-NO-RO-
-BG
NL-CY-MT
AT-CH
HU
The fryer is designed for supply with the following gas fuels:
2E -family 2 group E
2Lw - family 2 group L
3B/P -family 3 group B/P
3P -family 3 group P
Fryers series 97251.. with three burners and one tank 17L have a heat input of 15.0 kW
5. ADAPTING THE SINGLE-CHAMBER FRYER TO ANOTHER TYPE OF GAS:
1. Replace the nozzles on the main burners - cut off the gas supply and then unscrew the screws that lock
the air regulators. Then unscrew the nozzles in the sockets. New nozzles should be selected in accordance
with Table 4.1.
2. Align the sleeve in the burner body by ejecting or retracting the sleeve into the body of the fryer to
the position shown in Table 4.1. Once set, tighten the screw securing the sleeve.
Gas Nominal pressure
[mbar]
G30/G31 28-30/37
G20/G25 20/25
G30/G31 50/50
G20 20
G20 20
G30/G31 28-30/37
G20 20
G30/G31 28-30/28-30
G30/G31 28-30/28-30
G20 20
G30/G31 50/50
G20 25
G30/G31 28-30/28-30
Table 4.2
(20mbar) – high-methane natural gas (G20)
(20mbar) – nitrogen-rich natural gas (G27)
(37mbar) – propane-butane (G30/G31)
(37mbar) – propane (G31)
Layout of components in the cabinet
Main nozzle
- 78 -
Minimum pressu- Maximum pressu-
re [mbar]
20/25
17/20
42.5/42.5
17
17
20/25
17
25/25
25/25
17
42.5/42.5
18
25/25
re [mbar]
35/45
25/30
57.5/57.5
25
25
35/45
25
35/35
35/35
25
57.5/57.5
33
35/35