Nuova Simonelli MicroBar Instrucciones De Manejo página 55

7.
PROGRAMMING
7.1
LEGENDA
1
3
5
7
ENTER key: used to enter menus
1
and/or to confirm val-
ues and pass on to the
next step.
CURSOR keys: used to scroll through
2
the menus and to
increase / decrease
4
value settings.
RESET key: used to confirm and to
3
return to the previous
step.
52
LIST OF PROGRAMMABLE
FUNCTIONS
Functions that can be accessed from the USER
and TECHNICIAN modes.
1. TOT. COUNT
2. PRODUCT NAME
3. PROG. DOSES
2
4. PROG. GRINDER 1 S
5. PROG. GRINDER 2 S
(version with double grinder only)
4
6. MILK DOSE
7. DATE/TIME
6
8. PROGRAM. ON/OFF
9. ENERGY SAVING
10. LANGUAGE
8
Functions that can "ONLY" be accessed from
the TECHNICIAN mode.
This operation may ONLY be per-
Fig. 34
formed by a Specialist Technician.
Adjustments made by Unqualified
Technicians or other people may ren-
der the Guarantee null and void.
Additional functions that can be accessed from
the TECHNICIAN mode are:
11. PREINFUSION
12. PRESSING
13. DREGS NUMBER
14. MILK CLEAN WARN.
15. CLEAN ALARM
16. FINAL WASHING CYCLE
17. GROUP SETTING
18. GRINDER SETTING
19. COFFEE TEMP.
20. STEAM TEMP.
21. PASSWORD
22. SMART CARD
23. WATER FILTER L
24. DE-SCALE
7.2
PROGRAMMING
Entering the programming function gives
access to all of the USER and TECHNICIAN
mode functions.
For accessing the programming sites proceed
as follows:
NOTE: Can be performed with machine on.
• Insert the key into the appropriate lock.
• Turn the control panel hatch key counter-
clockwise.
• Open the control panel hatch; the display
will read:
• Press the ENTER key, close the front panel,
the display will read: