Energy Saving; Preinfusion - Nuova Simonelli MicroBar Instrucciones De Manejo

8. PROGRAM. ON/OFF
This is used to program the automatic
switching ON/OFF for the machine, only
with the machine switch in the ON posi-
tion.
The default setting for the machine has all
days of the week set to "STANDBY" and
therefore, the main switch must be used
to switch the machine on and off.
Press the ENTER key to access the sub-
menu and the display will read as follows:
Press the ▲▼ keys to view the settings for
each day of the week.
Press RESET to set SUNDAY as the weekly
day off, which will de-activate the automatic on
and off function.
The display will read as follows:
Press ENTER to reactivate the automatic on
and off function.
To confirm the setting, press the ▲ key, which
will then pass to the settings for the following
day.
Press ENTER and the switch on timer will begin
to flash; use the ▲▼ keys to increase /
decrease the time setting.
Once the required time has been set, press
ENTER to set the following day.
After SATURDAY, press the ▼ key to return to
the previous menu.

9. ENERGY SAVING

This is used to set the time after which the
machine enables the energy-saving
device, while still keeping the water tank
at working temperature.
Press the ENTER key to access the sub-
menu.
1 Hours:Minutes
Use the ▲▼ keys to increase / decrease the
time after which the ENERGY-SAVING function
is enabled by 30-minute intervals. This function
is deactivated if the timer is left at zero.
Press the RESET to quit the submenu and
return to the main menu, confirming the new
setting.
10. LANGUAGE
Press the ENTER key to access the sub-
menu.
This sets the language for operator-
machine interface, as shown on the dis-
play.
Press the ▲▼ keys to select the required lan-
guage.
The possible languages are as follows:
Italian, English, Spanish, German and French.
Press the RESET key to quit the submenu and
return to the main menu, confirming the new
setting.
7.5
TECHNICIAN MODE
PROGRAMMING CYCLE
To access the functions that can only be pro-
grammed using the TECHNICIAN MODE,
scroll through all of the functions that can be
accessed from the USER MODE until the dis-
play reads as follows:
Enter the correct password to view the first item
in the programming menu that can be accessed
from the TECHNICIAN MODE.
NOTE: The standard password setting is:
Therefore, to access the functions
reserved to technicians when entering
this mode for the first time, or if the
password has not yet been changed, it
is necessary to press the
the machine keyboard five times in suc-
cession.
If an incorrect password is entered, the
machine will automatically quit the program-
ming mode to enter the machine ready mode.

11. PREINFUSION

Press the ENTER key to access the sub-
menu.
This programmes the possibility of coffee
tab preinfusion (YES or NO) for each sin-
gle beverage.
1 Preinfusion Ristretto
2 Preinfusion 2 Ristretto
3 Preinfusion Espresso
4 Preinfusion 2 Espresso
5 Preinfusion Coffee
6 Preinfusion 2 Coffee
7 Preinfusion CoffeeCreme
8 Preinfusion Caffelatte
9 Preinfusion Macchiato
10 Preinfusion Cappuccino
11 Preinfusion Big Cappuccino
key on
55