Internet
User name
— Enter your user name if required by the
•
service provider. User names are often case-sensitive
and provided by your service provider.
Prompt password
•
password each time you log into a server or
the password in your device memory and automate
the login.
Password
— Enter your password if required by the
•
service provider. The password is often case-sensitive
and provided by the service provider.
Authentication
— Select
•
password always encrypted,
password encrypted when possible.
Homepage
— Enter the web address of the page you
•
want to display as the home page when you use this
access point.
4. After defining the settings, select
settings
to define the advanced settings or
the settings and exit.
Advanced internet access point
settings for packet data (GPRS)
Select
Menu
Tools
>
>
points.
After setting up a basic internet access point for packet data
(GPRS), select
Options
>
following advanced settings:
70
— Select
Yes
to enter your
Secure
to send your
orNormal
to send your
Options
>
Back
Settings
Connection
>
Advanced settings
and define the
Network type
•
protocol type. The internet protocol defines how data is
transferred to and from your device.
Phone IP address
•
No
to save
Select
Automatic
IP address. This setting is shown only if you select
Network type
DNS address
•
Secondary DNS address
required by your service provider. Otherwise, the name
server addresses are provided automatically.
Proxy server address
•
server. Proxy servers are intermediate servers used by
some service providers between a browsing service and
its users. These servers may provide additional security
and speed up access to the service.
Advanced
Set up an access point for WLAN
to save
manually
1. Select
Access
2. Select
Access
access point, or select an existing access point from the
>
list and then
the access point as a basis for the new one.
3. Define the following settings.
Connection name
•
connection.
— Select
IPv4
or
— Enter the IP address of your device.
to have the network provide the device
> IPv4.
— Select
Primary DNS address
and enter their IP addresses, if
— Enter the address of the proxy
Menu
Tools
Settings
>
>
points.
Options
New access point
>
Options
Duplicate access point
>
— Enter a descriptive name for the
© 2008-2009 Nokia. All rights reserved.
IPv6
as the internet
and
Connection
>
>
to create a new
to use