CAMPAGNOLO NEUTRON Carbon Hub Manual De Uso página 43

6.5 - FITTING THE FREEWHEEL BODY ON THE HUB
39
Place the freewheel on the hub and hold it in position, lower the three pawls one by one with the Allen wrench or with
a screwdriver and fully insert the freewheel in its seat (Fig. 40). Tighten the locking screw with the 17 mm wrench (Fig.
41), holding the axle steady on the freewheel side with a fully inserted 5 mm Allen wrench (tightening torque: 15 N.m -
11 lb.ft).
40 41
CLOSE
15 N.m - 11 lb.ft
20