Waring Commercial MMB145CE/K Manual De Instrucciones página 5

MMB145CE/K OPERATION
1. Before starting, make sure that the blender is
unplugged.
2. Ensure the blender is in
the SToP position. Place
container on blender base.
Be sure container is fully
seated and that drive
coupling is properly engaged.
3. Put ingredients into container
and cover it. Do not fill above MAX FILL line.
4. This blender has 2 speed settings: hI and Lo. Press
toggle switch to desired position. To crush ice, always
use hI speed setting. Green LED light will blink while in
operation.
NoTE: This blender utilizes a Slow Start
beginning hI or Lo operation, the unit will start in a lower
speed for 3 seconds and then switch to the full selected
speed. PULSE utilizes a 1-second Slow Start
for a more even blending of ingredients in container.
5. When finished blending, set toggle switch to SToP
position.
6. This blender is equipped with a PULSE option. hold
toggle switch in Down position to engage PULSE
function. Unit will run on hI speed until the toggle
switch is released.
7. Allow motor to come to a complete stop before
removing container from blender base. Never place
the container on the motor base or remove it from
the motor base while motor is running.
8. Always hold container with one hand when starting and
while blending. Never operate without jar lid.
9. Wash and dry container after each use. See Cleaning
and Sanitizing Instructions.
10. Unplug to turn off all power to blender.
feature. When
™
5
. This allows
™