Covidien Nellcor Instrucciones De Uso página 3

en
SpO Sensor
2
Multisite Reusable
Identification of a substance
that is contained or present
within the product or
packaging.
This device is not made with natural rubber latex or DEHP.
Directions for Use
Indications/Contraindications
The Nellcor™ SpO
2
noninvasive arterial oxygen saturation and pulse rate monitoring are required for patients
weighing greater than 1 kg.
The SpO Sensor is applied to the sensor site using Nellcor adhesive wraps, models ADH-A/N
2
(adult/neonatal) and ADH-P/I (pediatric/infant), or Nellcor disposable foam wraps, models FOAM-
A/N and FOAM-P/I. Nellcor adhesive and disposable foam wraps are intended for single patient
use only. Additionally, the SpO
(Pediatric SpO Sensor Reusable).
2
ADH-A/N
FOAM-A/N
ADH-P/I
FOAM-P/I
D-YSE
D-YSPD
Sensor Multisite Reusable, model D-YS, is indicated for use when continuous
Sensor can be used with D-YSE (SpO
2
>1 – <3 kg
◆
◆
Identification of a substance
that is not contained or
present within the product
or packaging.
3 – 40 kg
3
Protected against access to
IP22
hazardous parts with a finger and
protected against vertically falling
water drops when sensor tilted
up to 15°.
Ear Sensor) or D-YSPD
2
◆
◆
◆
>40 kg
◆
◆
◆