Angle Grinder; Noise/Vibration Information - Bosch GWX 18V-15 C Professional Manual Original

Angle grinder

Rated voltage
A)
Rated speed
B)
No-load speed
Max. grinding disc diameter
Kickback stop
Restart protection
Run-out brake
Speed preselection
Weight according to EPTA-Procedure 01:2014
– with low-vibration auxiliary handle
– with standard auxiliary handle
Recommended ambient temperature during charging
Permitted ambient temperature during operation
during storage
Compatible rechargeable batteries
Recommended rechargeable batteries for maximum
performance
Recommended chargers
Data transfer
®
Bluetooth
Signal interval
F)
Max. signal range
A) Rated speed in accordance with EN 60745-2-3
B) Measured at 20–25 °C with rechargeable battery ProCORE18V 8.0Ah and depending on the battery's state of charge as well as the tool's
operating temperature
C) Depends on battery in use
D) Limited performance at temperatures <0 °C
E) The mobile terminal devices must be compatible with Bluetooth
(GAP).
F) The signal range may vary greatly depending on external conditions, including the receiving device used. The Bluetooth® range may be signi-
ficantly weaker inside closed rooms and through metallic barriers (e.g. walls, shelving units, cases, etc.).

Noise/Vibration Information

Noise emission values determined according to
EN 60745-2-3.
Typically the A-weighted noise level of the power tool are: 90
dB(A); sound power level 101 dB(A). Uncertainty K = 3 dB.
Wear hearing protection!
Vibration total values a (triax vector sum) and uncertainty K
h
determined according to EN 60745-2-3:
Surface grinding (roughing):
2 2
a = 6.0 m/s , K = 1.5 m/s ,
h
Disc sanding:
2 2
a = 2.5 m/s , K = 1.5 m/s .
h
The vibration level given in these instructions has been
measured in accordance with a standardised measuring pro-
cedure and may be used to compare power tools. It can also
Bosch Power Tools
V=
-1
min
-1
min
mm
C)
kg
kg
°C
D)
and °C
ProCORE18V... ≥ 5.5 Ah
s
m
®
Low Energy devices (version 4.2) and support the Generic Access Profile
be used for a preliminary estimation of exposure to vibra-
tion.
The stated vibration level applies to the main applications of
the power tool. However, if the power tool is used for differ-
ent applications, with different application tools or poorly
maintained, the vibration level may differ. This can signific-
antly increase the exposure to vibration over the total work-
ing period.
To estimate the exposure to vibration accurately, the times
when the tool is switched off or when it is running but not ac-
tually being used should also be taken into account. This can
significantly reduce the exposure to vibration over the total
working period.
Implement additional safety measures to protect the oper-
ator from the effects of vibration, such as servicing the
English | 23
GWX 18V-15 C GWX 18V-15 SC
18
11,000
9800 3400–9800
125
●
●
●
–
2.6–3.6
2.4–3.4
0 to +35
–20 to +50
GBA 18V...
ProCORE18V... ProCORE18V...
ProCORE18V... ≥ 5.5 Ah
GAL 18...
GAX 18...
GAL 36...
®
Bluetooth 4.2 Bluetooth
E)
(Low Energy) (Low Energy)
8
30
1 609 92A 5RL | (19.06.2020)
18
11,000
125
●
●
●
●
2.6–3.6
2.5–3.5
0 to +35
–20 to +50
GBA 18V...
GAL 18...
GAX 18...
GAL 36...
®
4.2
E)
8
30