Troubleshooting
You can often easily eliminate problems that may occur
on your own. Before calling customer service, take into
account the following information.
Malfunction
Possible cause
General electrical mal-
The household fuse has opened.
function.
The electrical ignition
Food or cleaner residue may be between the
doesn't work.
flame igniters and the burners.
The burners are wet.
The burner lids aren't correctly positioned.
Power failure
Uneven burner flame
The burner parts aren't correctly positioned.
The openings of the burner are dirty.
Gas flow seems abnor-
Intermediate valves are closed.
mal or no gas comes
If using a gas cylinder, make sure it's not empty. Replace gas cylinder.
out.
It smells like gas in the
Potential leak on connection of gas cylinder.
kitchen.
The burner immediately
You haven't held the control knob long enough.
goes out after ignition.
The openings of the burner are dirty.
16
Solution
Check in the fuse box whether the fuse has
opened.
The space between flame igniter and burner
must be clean.
Carefully dry the burner lids.
Check whether the lids are correctly positioned.
Light burner by hand.
Correctly position burner parts.
Clean openings of the burner.
Open the intermediate valves.
Check gas cylinder connection for leaks.
After the burner has ignited, continue pressing
the control knob for a few seconds. Press in
firmly.
Clean openings of the burner.