Troubleshooting - Gaggenau CG 270 Instrucciones De Funcionamiento

Troubleshooting

What´s wrong
...if none of the electrical
system works?
...if the electric ignition system
does not work?
...if the flame on the burners is
not evenly distributed?
...if the gas flow does not seem
normal or there is no gas flow
at all?
...if the kitchen smells of gas?
...if the safety devices on the
different burners do not work?
10
Possible cause
-Faulty fuse.
-The automatic circuit breaker
or mains differential has been
triggered.
-There may be food or cleaning
product particles between the
spark plugs and the burners.
-The burners are wet.
-The covers on the burners are
not in the right position.
-The burner components have
not been assembled properly.
-The gas outlets on the burners
are dirty.
-The gas flow has been cut at
an intermediate stopcock.
-If the gas is supplied from a
gas bottle, it may be empty.
-One of the valves has been
left open.
-Possible leak on the gas bottle
coupling.
-The control knob has not been
kept pressed in for long
enough.
-The outlets on the burners are
dirty.
It is not always necessary to call the Service Centre. In
some cases, you may be able to solve the problem
yourself. This table contains some useful information.
Important information:
Only authorised personnel from our Service Centre are
qualified to work on the main gas and electric systems.
Solution
-Check the fuse in the main fuse box and
replace it if it is faulty
-Check to see if the circuit
breaker or a differential has
been triggered in the mains
supply box
-The gap between the spark
plug and the burner needs to
be cleaned carefully.
-Dry the burner covers and spark plugs
carefully.
-Check that the covers have been put in the
proper position.
-Put the components in their
correct positions.
-Clean the gas outlets on the
burners.
-Open any intermediate stopcocks.
-Replace the gas bottle with
a full one.
-Check to see if a valve has
been left open.
-Check that the coupling on the gas bottle is in
order.
-Once ignited, keep the control knob pressed
in for a few seconds.
-Clean the gas outlets on the
burners.