Hamilton Beach FlexBrew 49966 Manual De Instrucciones página 5

Cafetera doble
Tabla de contenido
Idiomas disponibles

Idiomas disponibles

How to Brew a Single-Serve Pack
w WARNING
Burn Hazard.
If overflow occurs, unplug and allow coffee maker to cool.
To avoid hot coffee overflowing:
• Fill reservoir with cup or travel mug of water into which the coffee
will be brewed.
• Fully insert cup or travel mug on drip tray.
• Do not lift lid during the brewing process.
• If brew process is stopped early, the water must be drained from
the unit. Place a large mug on drip tray/cup rest. Press the BREW
NOW I/ button. Failure to drain the unit can cause the next cup
brewed to overflow.
w CAUTION
Cut Hazard.
Removable single-serve pack holder has a sharp needle. Piercing
needle on underside of lid also is sharp. Use caution when handling.
NOTES:
• Use only cold water in reservoir. Do not use hot water.
• Do not reheat coffee in the machine.
• Do not use creamer or nondairy creamer in reservoir.
• After brewing hot cocoa single-serve packs, brew a water-only
cycle without a single-serve pack to avoid the possibility of
clogging the piercing needle.
• Coffee maker brews all the water added.
• Press the BREW NOW I/ button again to STOP brewing midcycle.
Remaining water must be removed. See warning statement above.
• If brew indicator light flashes three times, the lid is not closed.
Lower lid until it clicks to lock. Press BREW NOW I/ button.
• Do not brew coffee without removable needle holder locked into
place.
1. Plug into outlet. Press the single-serve
( ) button.
2. Lift the lid latch until the lid clicks into
place.
3. Insert the funnel in the opening. Place
gray removable single-serve pack holder
in funnel, aligning handle with funnel
handle.
4. Place a pack into the single-serve pack
holder. Do not remove foil.
5. Close lid and snap in place to pierce
single-serve pack.
6. Lift single-serve water reservoir lid.
7. Fill cup or travel mug into which the
coffee will be brewed and add water
to the water reservoir. 10 oz. (296 ml)
of water is the MAX amount for single-
serve packs.
8. Close lid. Press the BREW STRENGTH
button to select regular or bold.
9. Use the cup rest for a cup or mug and
remove the cup rest for a travel mug.
10. Press BREW NOW I/ button to start
brewing. The brew indicator light will
light up to show that the coffee maker
is brewing. The coffee maker will shut
off automatically when brewing is
complete.
11. Press BREW NOW I/ button to turn off.
Unplug.
12. Funnel and single-serve pack holder
should be rinsed after every use.
3
4
7
9
5
Tabla de contenido
loading

Tabla de contenido