Dometic COOLFREEZE CF 11 Instrucciones De Uso página 12

Operation
Connecting to a 100 – 240 V AC mains (e.g. at home or in the office)
D
DANGER! Danger of electrocution
•
Never handle plugs and switches with wet hands or if you are
standing on a wet surface.
•
If you are operating your cooler on board a boat with an AC mains
connection of 100 – 240 V from the land, you must install a residual
current circuit breaker between the 100 – 240 V AC mains supply
and the cooler.
Seek advice from a trained technician.
The cooling device has a built-in multi-voltage mains adapter with a priority circuit for
connecting to a 100 – 240 V AC supply. The priority circuit automatically switches to
mains operation if the appliance is connected to a 100 – 240 V AC supply, even if the
12/24 V cable is still connected.
➤ Plug the 100 – 240 V connection cable into the device AC voltage socket and
connect it to the 100 – 240 V AC voltage mains.
6.5 Secure the cooling device in the vehicle (CF11)
➤ Open the lid of the cooling device.
➤ Place the safety strap into the guide (fig. 4 1, page 4) of the cooling device.
➤ Close the lid.
➤ Engage the safety strap and tighten it.
Switch on the cooling device (fig. 1, page 3, fig. 2,
6.6
page 3)
A
NOTICE! Risk of damage!
•
Always ensure sufficient ventilation so that the heat generated during
operation can dissipate. Ensure that the ventilation slots are not
covered. Make sure that the device is sufficiently far away from walls
and other objects so that the air can circulate.
•
Ensure that the items placed in the cooler are suitable for cooling to
the selected temperature.
•
Disconnect the cooler and other electric consumers from the battery
before you connect the battery to a quick charging device. Overvolt-
age can damage the electronics of the device.
12
CoolFreeze
EN