Dometic ACX Serie Instrucciones De Uso página 13

ACX35, ACX40, ACX40G
2.2 Operating the cooler safely
!
CAUTION!
• Before starting the device, ensure that the power supply line and the
plug are dry.
• Only use the appliance where there is good ventilation.
• Do not let the appliance operate unattended.
• Only operate the cooler from a single energy source.
A
NOTICE!
• Do not use electrical devices inside the cooler unless they are
recommended by the manufacturer for that purpose.
• Do not place the cooler near naked flames or other heat sources
(heaters, direct sunlight, gas ovens etc.).
• Danger of overheating!
Always ensure sufficient ventilation so that the heat generated during
operation can dissipate. Make sure that the cooler is sufficiently far
away from walls and other objects so that the air can circulate.
• Ensure that the ventilation openings are not covered.
Keep the following spaces (fig. 1, page 3).
• Do not fill the inner container with ice or fluid.
• Never immerse the cooler in water.
• Protect the cooler and the cable against heat and moisture.
• To enable the refrigerant to circulate properly, the cooler may not
tilted by more than 3°. Use a spirit level to make sure the cooler is level.
2.3 Safety when operating with DC power
A
NOTICE!
• Only select DC operation (battery mode) if you are using a battery
monitor or if the alternator in your vehicle provides sufficient voltage.
• Only use cables with an appropriate cross section.
EN
Safety instructions
13