Selecting Tracks; Fast Searching (Audible); Random Track Play (Mix); Scanning Tracks (Scan) - Blaupunkt Seattle MP57 Instrucciones De Manejo

CD mode
u
Gently close the control panel whilst
exerting a little pressure until you feel
it click into place.
The CD playback starts and "CD" is shown
on the display.
Note:
If the vehicle ignition was switched
off prior to inserting the CD, you must
switch the device on fi rst with the On/
Off button 3 to start the playback.
If a CD is already inserted in the drive,
u press the SOURCE button 4 repeat-
edly until "CD" appears on the display.
Playback begins from the point at which it
was last interrupted.

Selecting tracks

u Press an arrow button > or @ to se-
lect the next or previous track.
If you press the > or
the player will play the current track again
from the beginning.

Fast searching (audible)

To fast search backwards or forwards,
u press and hold down the > or @ ar-
row button until fast searching back-
wards or forwards begins.

Random track play (MIX)

u Press the softkey "MIX" 6.
"MIX ALL" briefl y appears on the display,
info line 2 F permanently displays "Mix
All". The next randomly selected track will
then be played.
20
Cancelling MIX
u
"MIX OFF" briefl y appears on the display,
info line 2 F no longer displays "Mix All".
Scanning tracks ( Scan)
You can scan (briefl y play) all the tracks on
the CD.
u
The next track will then be scanned. "SCAN"
and the current track number are intermit-
tently shown on the display.
Cancelling Scan and continuing listening
button @ once,
to a track
To end the scanning process,
u
The currently scanned track will then con-
tinue to be played normally.

Repeating tracks (RPT)

If you want to repeat a track,
u
"REPEAT TRACK" briefl y appears on the
display, info line 2 F permanently displays
"Rpt Trk". The track is repeated continuous-
ly until you deactivate Repeat.
Press the softkey "MIX" 6 again.
Press the OK button B for longer than
2 seconds.
Note:
You can set the scan time. For further
information, please read the section
entitled "Setting the scanning time" in
the "Radio mode" chapter.
press the OK button B.
press the softkey "RPT" 7.