IKRA GSLN 2600 Manual De Instrucciones página 19

ways wear eye protection (safety goggles).
Wearing personal protection equipment as a dust
mask, nonslip safety shoes, safety helmet or ear
protectors (depending on the type and application
of the tool) reduces the risk of injury.
c) Avoid unintentional operation. Make sure that
the power tool is switched off before you con-
nect it to the mains supply and/or the battery
and whenever you pick up or carry the tool.
When carrying the tool with your finger on the on/
off switch or connecting the tool to the mains supply
with the switch in 'ON' position, this may result in
accidents.
d) Remove adjustment tools or wrenches and
the like before you switch the power tool on. A
wrench or other tool that is inside or on a rotating
part of the tool may cause injury.
e) Avoid unusual postures. Make sure to have a
safe footing and keep your balance at all times.
This will allow you to better control the power tool
in unexpected situations.
f) Wear suitable clothes. Do not wear wide cloth-
ing or jewellery. Keep your hair, clothes and
gloves clear of all moving parts. Loose clothing,
jewellery or long hair may get caught in moving
parts.
g) If dust extraction/collection devices are pro-
vided make sure that they are connected and
used properly. The use of a dust extraction device
may reduce risks caused by dust.
4) Use and handling of the power tool
a) Do not overtax the power tool. Use the power
tool intended for your type of work in each case.
The use of the suitable power tool within the stated
range of performance makes working more effec-
tive and safer.
b) Do not use a power tool with a damaged switch.
A power tool that cannot be switched on or off any
more is dangerous and must be repaired.
c) Pull the mains plug and/or remove the battery
before adjusting a tool, changing accessories
or putting the tool aside. This precaution avoids
the unintentional start of the tool.
d) Store power tools that are currently not used
out of the reach of children. Do not allow per-
sons to use the tool if they are not familiar with
the tool or these instructions. Power tools are
dangerous if used by inexperienced persons.
e) Thoroughly maintain your power tool. Check
whether moving parts are working properly and
are not jamming/sticking, and whether parts are
broken or otherwise damaged in a way that may
affect the function of the power tool. Have dam-
aged parts repaired before using the tool. Many
accidents are the result of poorly maintained power
tools.
f) Keep cutting tools sharp and clean. Thoroughly
maintained cutting tools with sharp cutting edges
are jamming less often and are easier to guide.
g) Use power tools, accessories, add-on tools, etc.
in accordance with these instructions and in the
way prescribed for the respective type of tool.
You should also consider the working condi-
tions and the work to be carried out. The use of
power tools for purposes other than those intended
for the respective tool may result in dangerous situ-
ations.
5) Service
a) Have the power tool serviced by qualified tech-
nical personnel only; repairs should be carried
out using exclusively original spare parts. This
will ensure the continued safe operation of the
power tool.
Safety Words
Training
1. Become familiar with this user guide before attempt-
ing to operate this shredder.
2. Never allow children or people unfamiliar with these
instructions to use the garden shredder. Local regula-
tions may restrict the age of the operator.
3. This product is not intended for use by persons
(including children) with reduced physical, sensory
or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision
or instruction concerning the use of the product by a
person responsible for their safety. Children should
be supervised to ensure that they do not play with
the product.
4. The operator or user of this garden shredder is re-
sponsible for accidents or hazards occurring to other
people or their property.
Prepartion
1. Do not wear loose clothing or clothing that has hang-
ing cords or ties, also do not wear jewellery which can
be caught in the moving parts. Use of sturdy gloves
and non-skid footwear is recommended. Wear ear
protectors and safety glasses. If the garden shredder
is used in dusty conditions, wear a face mask.
2. Ensure that the garden shredder is correctly assem-
bled before use.
3. Never shred while people, especially children, or pets
are nearby.
4. Never pull the garden shredder by the cable, or pull
the cable to disconnect from the mains supply. Be
aware of the position of the cable at all times. Keep
it away from the feeding chute and outlet openings.
5. Make sure that the shredder is standing on a firm
level surface before switching on. Only operate the
machine in open space (e.g. not close to a wall or
other objects).
6. Do not operate the machine on a gravel or paved sur-
face when ejected material could cause injury.
7. Keep the cable away from the blades, sharp edges,
oils or heat sources. Do not use the garden shredder
if the cable is damaged.
8. This garden shredder should be used exclusively for
shredding garden refuse. Do not use it for any other
purposes.
9. Before starting the machine, check that all screws,
GB-3