Air Filter; Maintenance Interval; Air Filter Cleaning - Maruyama EH27D Manual Del Propietário

The cutting blades may be moving during idle speed
adjustment. Wear the recommended personal protec-
tive equipment and observe all safety instructions.
Keep hands and body away from the blades.
When the throttle trigger is released, the engine should
return to an idle speed between 2700 and 3300 RPM,
or just below the clutch engagement speed. The blades
must not move and the engine should not stall (stop
running) at engine idle speed.
To adjust the engine idle speed, rotate the idle speed
adjustment screw on the carburetor.
Idle Speed
Adjustment Screw
• Turn the idle speed screw in (clockwise) to
increase the engine idle speed.
• Turn the screw out (counterclockwise) to decrease
the engine idle speed.
If idle speed adjustment is necessary, and after
adjustment the blades move or the engine stalls, stop
using the immediately!
Contact your local authorized Maruyama Dealer for
assistance and servicing.

Air Filter

Maintenance Interval

• The air filter should be cleaned daily, or more
o f t e n w h e n w o r k i n g i n e x t r e m e l y d u s t y
conditions.
• Replace after every 100 hours of operation.

Air Filter Cleaning

Air Filter Cover Filter Screen
Foam Element
1. Loosen the knob and remove the air filter cover.
2. Remove the foam element and filter screen from
the air filter body.
3. Clean the foam element and filter screen with
warm, soapy water. Let the screen and element dry
completely.
4. Apply a light coat of SAE 30 motor oil to the
foam element and squeeze out all excess oil.
5. Reassemble the filter screen and foam element to
the air filter body.
6. Reinstall the air filter cover and tighten the knob.
− US-19 −