Storing The Machine; Storing The Battery; Handling And Transportation; Assistance And Repairs - GGP ITALY MH 24 Li Manual De Instrucciones

8.1.1 Checks
Periodically check that the blades are
not bent, damaged or deformed and that
the screws are adequately tightened.
Adjustment of the distance between
blades is not necessary, as this is
predetermined by the manufacturer.
8.1.2 Sharpening
It is necessary to sharpen the blades when
the trimming performance decreases and
the branches tend to stick together.
For safety reasons, sharpening should
be done by a Specialised Centre with
suitable skills and equipment for the job;
without risking any damage to the blade
which would make it unsafe when used.
Always replace and never repair a
blade which has blunt cutting edges.
8.1.3 Replacement
The blade must never be repaired,
but must be replaced as soon as
signs of breaking are noted or the
sharpening limit is exceeded. For
safety reasons replacements should be
performed by a Specialised Centre,
Blades displaying the code indicated
on the Technical Data table should
be used on this machine.
Given product evolution, the blades listed
in the "Technical Data" table may be
replaced in time with others having similar
interchangeable and operating safety features.
9. STORING
IMPORTANT The safety regulations to
follow for putting into storage are described
in paragraph 2.4. Strictly comply with these
indications to avoid serious risks or hazards.

9.1 STORING THE MACHINE

When the machine is to be stored away:
1. Remove the battery from its
housing and recharge it;
2. Mount the blade cover.
3. Wait until the motor is sufficiently cold;
4. Clean (par. 7.4).
5. Check there are no loose or damaged
components. If necessary, replace the
damaged components and tighten
any screws and loose bolts or contact
the authorised service centre.
6. Store the machine:
– in a dry place
– protected from inclement weather
– in a place where children cannot get to it
– making sure that keys or tools used
for maintenance are removed.

9.2 STORING THE BATTERY

The battery must be kept in a cool,
shaded place without humidity.
NOTE If unused for any length of
time, recharge the battery every two
months to prolong its working life.

10. HANDLING AND TRANSPORTATION

Whenever the machine is to be
handled or transported you must:
• Stop the machine (par. 6.5);
• Wait until the hedge trimmer
device is stationary;
• remove the battery from its housing
and recharge it (par. 7.2.2);
• Mount the bar cover;
• Wait until the motor is sufficiently cold;
• Wear heavy work gloves;
• Only hold the machine using the handgrips
and position the bar in the opposite
direction to that used during operation;
•
When transporting the machine
on a vehicle, always:
• fasten the machine securely
with cables or chains;
• position it so that it can not cause
a hazard for anybody.

11. ASSISTANCE AND REPAIRS

This manual provides all the necessary
information to run the machine and for correct
basic maintenance operations which can
be performed by the user. Any regulations
and maintenance operations not described
herein must be carried out by your Dealer
EN - 10