Installation Location; Installing The Indoor Unit - Mitsubishi Electric Mr. Slim PCA-RP71HAQ Manual De Instalación

2. Installation location

Fig. 2-1

3. Installing the indoor unit

(PAC-SG38KF-E)
Fig. 3-1
1)
2)
Independent piece (Removable)
Drain tubing
Gas tubing
Liquid tubing
T.B.box
Fig. 3-2
Fig. 3-3
Fig. 3-4
2.1. Outline dimensions (Indoor unit) (Fig. 2-1)
Select a proper position allowing the following clearances for installation and main-
tenance.
Models
RP71
RP125
Warning:
Mount the indoor unit on a ceiling strong enough to withstand the weight of
the unit.
* More than 300 mm recommended for easy maintenance.
Obstacle
3.1. Check the indoor unit accessories (Fig. 3-1)
The indoor unit should be supplied with the following spare parts and accessories
(contained in the inside of the intake grille).
Washer
Pipe cover
Pipe cover
Band
Drain hose
Band
Drain tubing cover
Filter element
Flare nut
(mm) 3.2. Preparation for installation (Fig. 3-2)
1) Suspension bolt installing spacing
Models
RP125
2) Refrigerant and drain tubing location
Models
RP125
3) Selection of suspension bolts and tubing positions (Fig. 3-3)
(mm)
Using the pattern paper provided for installation, select proper positions for suspen-
sion bolts and tubing and prepare relative holes.
Pattern paper
Suspension bolt hole
Indoor unit width
Secure the suspension bolts or use angle stock braces or square timbers for bolt
Use inserts of 100 kg to
150 kg each.
installation. (Fig. 3-4)
Use suspension bolts of
W3/8 or M10 in size
W D H
1136 650 296 Min. 100 Min. 100 Min. 500 Max. 250
1520 650 296 Min. 100 Min. 100 Min. 500 Max. 250
Accessory name
4 pcs + 4 pcs (with insulation)
1 pc Large size (For gas tubing)
1 pc Small size (For liquid tubing)
4 pcs
1 pc
2 pcs
1 pc
12 pcs
RP125 1 (ø19.05)
RP71 0
A
RP71 1180
1564
(mm)
C
RP71 542
422
(mm)
*
Q'ty
(mm)
B
1136
1520
3