Setting The Video Source; Detecting The Trailer Camera; Cleaning And Maintaining The Lcd Monitor; Warranty - Dometic PERFECTVIEW M71L Instrucciones De Montaje

Cleaning and maintaining the LCD monitor

7.4

Setting the video source

Proceed as follows to set the video source (fig. 0, page 6):
➤ If you would like to switch to a different video source, press the
✓ The monitor changes the camera in the order Camera 1 – Camera 2 – Camera 3 – Camera 4.
With the Video AV1/AV2/AV3/AV4 parameter, video inputs that are not used can be switched to
inactive. These empty inputs are then skipped over.
7.5

Detecting the trailer camera

This function is required when using a trailer camera (fig. c, page 7) if the system is activated auto-
matically via the reverse gear.
•
One camera connected (e.g. towing vehicle without a trailer):
the camera connected to AV1 (1) is activated.
•
Two cameras connected (e.g. towing vehicle with a trailer):
the camera connected to AV4 (2) is activated (AV1 is inactive).
8 Cleaning and maintaining the LCD monitor
A
NOTICE! Risk of damage!
•
Do not use sharp or hard objects for cleaning, as these may damage the monitor.
•
Remove the cable before cleaning the monitor to prevent short circuiting.
➤ Clean the monitor with a soft, damp cloth from time to time.
9

Warranty

The statutory warranty period applies. If the product is defective, please contact the
manufacturer's branch in your country (see the back of the instruction manual for the addresses) or
your retailer.
For repair and warranty processing, please send the following items:
•
Defect components
•
A copy of the receipt with purchasing date
•
A reason for the claim or description of the fault
10

Disposal

➤ Place the packaging material in the appropriate recycling waste bins wherever possible.
M
If you wish to finally dispose of the product, ask your local recycling centre or specialist
dealer for details about how to do this in accordance with the applicable disposal
regulations.
18
PerfectView M71L
button (6).
EN