Control Elements; Installing The Lcd Monitor - Dometic PERFECTVIEW M71L Instrucciones De Montaje

PerfectView M71L
It can operate up to four cameras, which can be activated via external control cables or manually.
This monitor also features a distance grid in the display which is activated automatically when the
reverse gear is engaged (AV1).
5.2

Control elements

The following control elements are located on the monitor:
No. in
fig. 0,
Description
page 6
1
2
3
4 –
5 +
6
7
8
6

Installing the LCD monitor

Tools required (fig. 1, page 3)
6.1
For installation and assembly you will need the following tools:
•
Measuring ruler (4)
•
Center punch (5)
•
Hammer (6)
•
Drill head set (7)
•
Drill (8)
•
Screwdriver (9)
To establish and test the electrical connection, the following tools are required:
•
Diode test lamp (1) or voltmeter (2)
•
Insulating tape (10)
EN
Switches the monitor on and off.
Switches to setup mode.
The light sensor automatically adjusts the brightness of the display
to the ambient light.
Reduces the audio volume or the selected parameter (brightness,
contrast, color).
Increases the audio volume or the selected parameter (brightness,
contrast, color).
Selects the camera.
Monitor bracket
Loudspeaker
Installing the LCD monitor
13