Idiomas disponibles
Idiomas disponibles
User's Manual
• A recreational vessel designed for use on internal waterways with an expected wind strength reaching
Grade 4 on the Beaufort Scale inclusive and a determining wave height of up to 0.3 metres inclusive, with
occasional waves up to 0.5 metres of height caused e.g. by vessels passing by.
• The boat has been manufactured in compliance with the EN ISO 6185-1 Standard, Category IIIA.
• Related standards: EN ISO 10087, EN ISO 10240, EN ISO 14945.
TABLE OF CONTENTS:
Dear Customer,
This manual will help you to easily and safely master your vessel.
It contains a detailed description of the vessel, the supplied or built-in
equipment, its sets as well as information about its control and mainte-
nance. Please read it carefully, thereby getting to know the boat before
actually using it.
If this is your fi rst vessel or you have changed the type of vessel and
do not know this type well, please get acquainted with its maintenance
and control prior to your fi rst individual use of the vessel so that it is safe
and comfortable. Your dealer or the National Yacht Federation or club
will recommend you appropriate training courses or qualifi ed instructors.
Do not pull off until the expected sailing conditions (wind strength and
wave height) are appropriate for the construction category of your vessel
and you and your crew are able to control it in these conditions.
Please store this manual in a safe place and hand it over to the new
owner should you sell the vessel.
1. Table of specification
(Dimensions When Inflated)
Length (cm)
Width (cm)
Number of air chambers
Side tube diameter (cm)
Approximate dimensions - packed in carry bag (cm)
Dimensions - packed in cardboard (cm)
Maximum operational pressure
Maximum weight (kg)
Maximum load (kg)
Maximum number of people
Draught (cm)
The highest anchor above surface (cm)
1. side tube
2. bottom
3. PUSH/PUSH valve - enables infl ation/defl ation, pressure
control and pressure measurement using a manometer
4. overpressure valve
5. manufacturer label
6. yellow "WARNING" label
7. infl atable seat
8. infl atable backrest
9. footrest
10. holder to attach the footrest
11. fastening strap
SAFARI 330
- legend of symbols used
Safari 330
3 + 1 + 2
27x18,5
60 x 43 x 26
0.02MPa [0.2Bar / 3PSI]
12. fastening strap holder
13. backrest holder
14. rotary valve for small chambers (seats, footrests etc.)
16. fl exible rope net
17. tracking fi n holder
18. rope to attach the backrest and fastening strap
ACCESSORY SUPPLIED WITH THE KAYAK:
Transport bag, trackin g fi n with user manual, belt for strapping
the folded kayak, user's manual with the warranty certifi cate,
sponge in a netting bag, repair kit containing glue, patches
and valve adaptors.
VERSION 3/2017
GB
330
80
12
130
1
15
30
9
Page 9
9
10
10
11
11
11
11
11
11
11
12
Capítulos
