Copying To A New Remote Control - Velux KLR 100 Manual Del Usuario

Copying to a new remote control

You can copy the contents from a remote control already in
operation to a new one so that the latter can also operate
the products registered.
The example shows how to copy the products and the
personal settings from a remote control A in operation to a
new remote control B not yet in operation.
Step 1: Prepare remote control A for copying
1
Press "Menu".
2
Select the submenu:
system settings
3
Press to highlight "Copy system".
Press "Enter" to confirm your choice.
Step 2 must now be completed within the next two min-
utes.
58 VELUX
A
Menu
systEm sEttiNgs
Register product
Copy system
security key
Configure
Enter
P1
ENGLISH
Step 2: Register products in remote control B
4
Insert the three batteries supplied
(type AA, 1.5 volt) into the remote
B
control as shown.
5
The language chosen in remote control A is automatically
chosen for remote control B.
Press "Enter".
House
No. 1
Window
6
Press "Register" to start registration of each product.
Please disregard the information in the display.
Locate
The display now indicates that copying is in progress.
Remote control B can now operate the same products as
remote control A.
Back
P2
laNguagE
Eesti
English
Español
Français
Enter
P1
auto sEt-uP
Prepare products
for registration and
press Register
within 10 minutes
Register
ENGLISH
B
P2
Info
VELUX 59