Velux KLR 100 Manual Del Usuario página 20

Program under Shortcut P1/P2
A program under Shortcut P1/P2 contains a sequence
of operating commands for one or more products. The
sequence is activated by pressing shortcut key P1 or P2.
You can record up to eight programs, four under each of
the shortcut keys. The programs can be set to be execut-
ed immediately, with a delay or at a certain time.
The example shows how to program skylight No. 1
(indicated as "Window" in the remote display) to open
immediately and close again after 1 hour and 30 minutes
(delay) by a single pressure on shortcut key P1.
1
Press "Menu".
2
Scroll through the menus:
Program settings Record
Note: If the current time and date has not been set al-
ready, please do so before choosing "Shortcut P1/P2", see
section Time and date.
3
Locate the skylight. The relevant product can be identi-
fied by pressing for a short period of time. This will
activate the product briefly.
Press "Select" to select the product.
4
The display shows the selected product.
• Press "Enter" to confirm your choice.
• Press "Edit" to select additional products from the
list.
5
Press to highlight "Set position".
Press "Enter" to confirm your choice.
38 VELUX
Menu
shortcut P1/P2
No. 1
No. 2
No. 3
Select
P1
No. 1
Enter
P1
set position
save position
Enter
P1
ENGLISH
6
Press
100% corresponds to fully open.
Press
House
No. 1
Window
Locate
7
Press
Press
HousE
WiNdoW
8
The display shows two time setting options.
Press
Back
from pressing P1 till the product will be activated.
Press
P2
HousE
WiNdoW
9
Press
Edit Choose 0 minutes if you want the skylight to open im-
mediately.
Press
P2
PositioN
Back
10
Press
Press
P2
to set the opening position of the skylight.
"Enter" to confirm your setting.
to highlight "Save position".
"Enter" to confirm your choice.
to highlight "Delay", ie the time that will pass
"Enter" to confirm your choice.
to set the relevant delay. First choose minutes.
"Enter" to change to hours.
to set hours.
"Enter" to confirm your setting.
ENGLISH
sEt PositioN
100% open
Enter Back
P1 P2
PositioN
set position
save position
Enter Back
P1 P2
timE CoNtRol
delay
starting time
Enter Back
P1 P2
dElay
00 h 00 min
Enter Back
P1 P2
dElay
00 h 00 min
Enter Back
P1 P2
VELUX 39