Commissioning The Pegase Vma 10 Pc Parameter-Setting Software; Connection; Installing The Software; Software Installation - Leroy-Somer VARMECA 10 Instrucciones De Uso

LEROY-SOMER
Variable speed motors and geared motors

COMMISSIONING THE PEGASE VMA 10 PC PARAMETER-SETTING SOFTWARE

3 - COMMISSIONING THE PEGASE
VMA 10 PC PARAMETER-
SETTING SOFTWARE

3.1 - Connection

3.1.1 - Checks on receipt
When you receive your parameter-setting kit, make sure that
it has not been damaged during transport. If necessary, report
any damage to the delivery company .
THE KIT COMPRISES:
- 1 connection cable (length = 3m) with RS 232 socket.
- 3 disks or 1 CD-ROM,
- 1 parameter-setting manual.
RS232
socket
3.1.2 - Connection
- The RS 232 socket on the cable is connected to the RS232
socket on the PC.
- The 20-pin socket on the cable connects to the connector
on the VARMECA 10 rolled cable.
VARMECA 10
connector
PARAMETER-SETTING MANUAL
VARMECA 10

3.2 - Software installation

- Start up your PC.
- Insert disk n˚1 (or the CD ROM).
- Open the "install" file.
- Follow the instructions given on the screen, in particular
those relating to changing disks.
- When the "Installation complete" message appears, click
on OK - The PEGASE VMA software is installed.
20-pin
socket
Ref. 3264 - 4.33/b -1.00
Depending on the PC used, the serial port may need
to be reassigned if communication proves to be
impossible (consult LEROY-SOMER)
41