Operation; Operation Instructions - HOLZMANN MASCHINEN RSG 620 Manual De Instrucciones

14

OPERATION

Device to be operated in a perfect state only. Inspect the device visually every time it is to be
used. Check in particular the safety equipment, electrical controls, electric cables and screwed
connection for damage and if tightened properly. Replace any damaged parts before operating
the device.
14.1

Operation instructions

Perform all machine settings with the machine being
Please observe the following operating instructions so that their work can
be performed safely and has the expected success.
Check before starting work:
 All cables and plugs
 The free and centered run of sanding belt
The sanding:
 Always use the proper, located in perfect condition abrasives. (Change wear
of abrasives immediately!) With abrasive in good condition you obtain a
good grinding result.
 Always guide the machine with both hands.
 Do not exert too much pressure to the workpiece
14.2 Operation
On-Off-Switch: Press the switch (1) to start the
machine. For continuous activation
press down the lock button (2) in
the meantime.
To switch off press the switch (1)
again.
Speed controll: To adjust the speed, turn the speed-
controller (3).
HOLZMANN MASCHINEN GmbH
W A R N I N G
disconnected from the power supply!
A T T E N T I O N
www.holzmann-maschinen.at
N O T I C E
OPERATION
25
RSG 620