La Marzocco Swift EPSB Manual De Uso página 32

OneGRINDINGMOTORdoesnotrun
(serialnumbersafter656)
- Press the reset button that corresponds with the motor that
does not run
- If the reset button pops out again, turn the grind adjust knob
4 rotations in the faster pour direction, insert the clean out
rod (see manual) remove the clean out rod, and restart the
grinder.
- If the reset button pops out again, remove the bean hopper
(see manual) and ensure that the
motor spins freely. If it does not spin freely follow the burr
chamber cleaning instructions and look for foreign objects: nail,
paper clip, rock, penny, etc.
- Do not attempt to reset the breaker more than twice as this
action may overheat and damage the triac on the main power
board.
*Swap the power leads between the two motors to
troubleshootmotorandtriac.
Shotgushesoutatfirstandthenslowsdown.
Adjust finish height of impeller
Inconsistentshottimes
Adjust finish height of impeller
Change worn burrs
La Marzocco International | USA • La Marzocco Technical Center s.r.l. | Italy
30