La Marzocco Swift EPSB Manual De Uso página 27

Chute clean-out tool
Occasionally the chute between the grinders and
tamping chamber may become clogged, causing
the
fuse (resettable or replacable) to trip. In addition
to replacing or resetting the fuse, it is important to
remove the clogged grounds. On machines with
serial numbers above 656, a chute clean-out tool
is included. This tool is used to loosen compacted
grounds and alleviate clogging.
(1) Clean out the hoppers and burr chambers as
described on pages 13-15.
(2) Remove tamper cover as described on p. 19.
(3) Find the holes located on either side of the
lower grounds chamber.
(4) Insert the long end of the clean-out tool into
the hole. Repeat on other side.
(5) Reassemble machine.
www.lamarzocco.com
WARNING
HAZARDOUSVOLTAGE
DISCONNECTFROM
POWERSUPPLYBEFORE
SERVICING
Liftoffcover
Inserttoolintochutehole
25