Channel Scan; Keypad Lock - Reer 5006 SCOPI Manual Del Usuario

Channel Scan

S
Briefly press the button to automatically scan all channels for activity.

Press the button

Scanning stops after a signal is detected and you listen to the channel for 8 seconds.
Press the PTT button to stop scanning and to respond.
With no response scanning starts again.

Keypad Lock

All keys (except the PTT button and On/Off) can be locked to prevent accidentally pushing
the buttons.
Lock keypad:

Press and hold the button
displayed.

Press and hold the button again for approx. 3 seconds, until the lock icon turns off.
Set CTCSS Codes
The additional CTCSS codes serve to avoid listening to other stations on the same channel.
This can even be a combination of baby and parent unit – you would not want to listen to
somebody else's baby. It is always possible that other users are on the same channel.
Do not mistake this for safety from interception: it is always possible to intercept non-encrypted
analog radio talk; this only needs any PMR 446 transceiver or a scanner.
The CTCSS (continuous tone coded squelch signal) tones are inaudible low frequency tones
mixed into the microphone signal. On reception the unit checks if the set tone exists and only
enables the speaker after detecting the correct tone.
For channels 1 to 8 the CTCSS codes can be set manually:

Press the MENU button three times (or until the numbers
display).

Press

Briefly press the PTT button or simply wait 5 seconds.
26
to start scanning; press again to stop scanning.
for approx. 3 seconds, until the lock icon ( ) is
to select the desired CODE.
English
00 38
to flash on the