Select Channel - Reer 5006 SCOPI Manual Del Usuario

Toggle Between Baby Monitor And Transceiver Modes
You can easily switch to transceiver mode in case your radios were set to baby
monitor mode:

Turn the units on.

Press the MENU button twice.

b or P (according to previous setting) flashes on the display.

Press
OF
must be

Briefly press the PTT button or wait for 5 seconds.
Volume

Press
The display shows the volume setting in steps between LE 00 and LE 09.

Select Channel

In Europe you can use one of 8 PMR 446 channels. Furthermore, you can individually set the
coding via CTCSS tones separately for channels 1 to 8 among 38 possible codes. This code is
displayed right from the channel number 1 to 8 as a smaller 2-digit number between 00 and
38.
5 I0
for example stands for channel 5 and CTCSS sub code 10.
To simplify operation with channels and sub codes the unit is preprogrammed with additional
channel combinations:
These are the channel numbers
permitted PMR channels with different CTCSS codes, saving the user the trouble with codes
and channels while using the numbers 9 to 48.
You only have to take care that all communicating units are set to the same numbers
on the display.
If communicating with users of other transceiver makes only use channels 1 to 8 and set the
sub codes manually, they are following international standards.
Set Channel

Press the MENU button once. The currently set channel flashes.

Press

Press the PTT button to confirm or simply wait a few seconds.
to toggle between b, P and OF. In transceiver mode the setting
(= baby mode OFF).
to set the volume.
9 48
to . These are all combinations with one of the 8
to select a different setting.
English 25