Reer 5006 SCOPI Manual Del Usuario página 23

Ocultar thumbs Ver también para 5006 SCOPI:
Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 50
Automatic Out-Of-Range Function
The automatic out-of-range function is automatically activated in babysitter mode and
needs no further settings!
The automatic out-of-range function automatically checks every 60 seconds if baby
and parent units are communicating. The parent unit sends a "search pulse", which is
answered by the baby unit. In case there is no reply for more than 2 minutes, then
both units are no longer communicating. This can be due to a dead spot, the
batteries of the other unit being exhausted or the unit being turned off., or there may
be interferences on the used channel.
During communication the
the communication is interrupted and the event is optically displayed on the parent
OU
unit as
and 5 beep tones are audible.
After 2 minutes the icon is again constantly displayed if a unit changes the location
and is again within the range of the other unit.
Activation and Deactivation of the Out-Of-Range Function
The out-of-range function can also be deactivated if not needed. Activation and
deactivation must be always made at the unit, which shall control the other (in case of
baby monitoring this is always the parent's radio)
Press the MENU button four times.
The display shows, depending on the previous setting, AU, Pb or OF.
Press
Pb
manual out of range function on request (=Press button)
AU
automatic function activated
OF
automatic and manual function both deactivated
Manual Out-Of-Range Test
Independent of the automatic out-of-range control of the other unit you also have the
manual out-of-range test. This test is also available with the out-of-range function
deactivated on the baby unit!
On the press of a button you can determine if the other unit is within range. The automatic control
on the parent unit must be set to
Press the button
and the parent unit plays a melody. Now you can be sure that you are at your
present position exactly within the communication range!
icon is constantly displayed. The icon flashes in case
to select:
Pb
AU
or
.
and wait a few seconds. The baby unit answers your request
English
23
Tabla de contenido
loading

Tabla de contenido