Front Safety Belt Height Adjustment - Ford Explorer Sport Trac 2005 Manual De Uso

BELT AND RETRACTOR ASSEMBLY MUST BE REPLACED if
the seat belt assembly "automatic locking retractor" feature or
any other seat belt function is not operating properly when checked
according to the procedures in the Workshop Manual. Failure to
replace the Belt and Retractor assembly could increase the risk of
injury in collisions.
In this mode, the shoulder belt is automatically pre-locked. The belt will
still retract to remove any slack in the shoulder belt. The automatic
locking mode is not available on the driver safety belt.
This mode should be used any time a child safety seat (other than a
belt-positioning booster) is installed. Children 12 years old and under
should be properly restrained in the rear seat whenever possible. Refer
to Safety restraints for children or Safety seats for children later in
this chapter.

Front safety belt height adjustment

Adjust the height of the shoulder
belt so the belt rests across the
middle of your shoulder.
To adjust the shoulder belt height,
push the button and slide the height
adjuster up or down. Release the
button and pull down on the height
adjuster to make sure it is locked in
place.
Position the safety belt height adjusters so that the belt rests
across the middle of your shoulder. Failure to adjust the safety
belt properly could reduce the effectiveness of the seat belt and
increase the risk of injury in a collision.
2005 P207 Explorer Sport Trac (p27)
Owners Guide (post-2002-fmt)
USA_English (fus)
Seating and Safety Restraints
101