Figure 3.1 - Programming Overview; Table 3.2 - Led Functions - Reliance electric SP120 Manual De Instrucciones Y Operación

English
3-2
LED
POWER
RUN
PRG
Hz
A
Start Key
Speed Pot
d01
d09
F01
F04
d01 d01 d01 d01 A ..
b ..
C ..
Table 3.2 – LED Functions
Will be on when:
power is applied to the drive (mains supply is switched on).
Important: The DC-bus capacitors and terminals are
energized even when the mains supply is
switched off.
the drive is in operation. For example, if a start command
has been given.
the drive is being programmed.
output speed is being displayed.
output current is being displayed.
the Start key has been pressed.
the speed pot is active.
A01
A98
PROG
b01
PROG
b89
C01
PROG
C91
Figure 3.1 – Programming Overview
Parameter
Entry
PROG
Saving entered
Parameters
SP120 AC Drive Installation and Operation