Branch Circuit Protection Devices; Input Power Conditioning; Table 2.2 - Branch Circuit Protection - Reliance electric SP120 Manual De Instrucciones Y Operación

2.4.3 Branch Circuit Protection Devices

2.4.4 Input Power Conditioning

Installing and Wiring the Drive
The following table shows the minimum recommended values for the branch circuit
protection devices:
Fuse Rating (Class J)
Model Single-Phase
S12-101P4LU 10A
S12-102P6LU 15 A
S12-104P0LU 20 A
S12-201P4LU 10 A
S12-202P6LU 10 A
S12-203P0LU 10 A
S12-204P0LU 15 A
S12-205P0LU 15 A
S12-207P1LU 20 A
S12-20010LU 30 A
S12-20015LU N/A
S12-401P5LU N/A
S12-402P5LU N/A
S12-403P8LU N/A
S12-405P5LU N/A
S12-408P6LU N/A
The drive is suitable for connection to input power within the rated voltage of the drive
(see specifications). The power factor of the input power supply must not exceed .99.
Compensation systems must ensure that overcompensation does not occur at any
time.
If the drive must be installed in any of the following conditions, a 3% impedance input
line reactor must be used:
•
line has intermittent noise spikes in excess of 2000 V
•
frequent voltage dips occur
•
the drive is operated on a generator
•
line has power factor correction capacitors
•
several drives are linked via a short common power supply bus bar
Table 2.2 – Branch Circuit Protection
Three-Phase Single-Phase
N/A 140M-D8N-C10
N/A 140M-D8N-C16
N/A 140M-D8N-C25
10 A 140M-D8N-C10
10 A 140M-D8N-C10
10 A 140M-D8N-C10
15 A 140M-D8N-C16
15 A 140M-D8N-C16
15 A 140M-D8N-C16
20 A 140M-D8N-C25
30 A
3 A
6 A
10 A
10 A
15 A
English
Circuit Breaker Type
Three-Phase
N/A
N/A
N/A
140M-D8N-B40
140M-D8N-B63
140M-D8N-B63
140M-D8N-C10
140M-D8N-C10
140M-D8N-C16
140M-D8N-C16
N/A 140M-D8N-C25
N/A 140M-D8N-B25
N/A 140M-D8N-B40
N/A 140M-D8N-B63
N/A 140M-D8N-C10
N/A 140M-D8N-C16
2-5