Tabla de contenido
Idiomas disponibles
Idiomas disponibles
English
Numeric
Alpha
Setting
Setting
00
{FW}
Forward
01
{RV}
Reverse
02
{CF1}
Preset
frequency input
03
{CF2}
Preset
frequency input
04
{CF3}
Preset
frequency input
05
{CF4}
Preset
frequency input
06
{JG}
Jog
09
{2CH}
nd
2
ramp
2-12
Table 2.5 – Programmable Digital Input Functions
Function
2-Wire (maintained) Run Forward/Run Reverse settings.
00{FW}(N.O.)
01{RV}(N.O.)
Motor Speed
The preset frequencies may be programmed in two ways:
1. By programming desired preset frequency values via parameters
A21 [
2. By selecting the corresponding digital input setting and entering the
desired frequency via parameter F01 [
Setting
02
03
04
05
Note: If any preset frequency input is active, all other frequency
commands will be ignored.
When this input is active, the 00{FW} or 01{RV} inputs will respond to
the frequency programmed via parameter A38 [
accel ramp is NOT active.
The stop command is determined by parameter A39 [
Note: The Jog command will not work with 3-wire control.
nd
Accel/Decel
2
Accel/Decel ramp times are activated via this input and programmed
via parameter A92 [
Description
1] through A35 [
PRESET FREQUENCY
Input
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
CF1
ON
ON
CF2
ON
ON
CF3
ON ON
CF4
Input 06 {JG} (NO)
Run CMD (NO)
Motor Speed
2] and A93 [
ACCEL TIME
PRESET FREQUENCY
FREQUENCY COMMAND
Preset Speed
ON
ON
ON
ON
ON
ON
ON
ON ON
ON
ON
ON ON ON ON
ON ON
ON
ON
ON ON ON ON
JOG FREQUENCY
JOG STOP MODE
2].
DECEL TIME
SP120 AC Drive Installation and Operation
15].
].
ON
ON ON
]. The
].
Capítulos
Tabla de contenido
