Chapter 1 Introduction; Conventions Used In This Manual; Model Number Description; Figure 1.1 - Model Number Structure - Reliance electric SP120 Manual De Instrucciones Y Operación

1.1 Conventions Used in This Manual

1.2 Model Number Description

Introduction
This chapter describes the SP120 AC drive and how to identify it based on its model
number. It also provides receiving information and a description of the drive
nameplate and other features.
Refer to Appendix A for specifications and mounting dimensions for the SP120 line
filter modules.
To help differentiate parameter names and parameter settings from other text
the following conventions will be used:
•
Parameter numbers and names are shown in the following way:
d01 [
OUTPUT FREQUENCY
•
Parameter settings for inputs and outputs are shown with the setting number
followed by the alpha description in {braces}. For example, 18{RS}.
Figure 1.1 below describes the SP120 AC drive model numbering structure. Note that
not all combinations can be configured as a drive. Refer to Appendix A, Technical
Specifications, for more information.
S12 = SP120
Voltage Rating
1 = 115 VAC (1φ)
2 = 230 VAC (1φ or 3φ)
4 = 460 VAC (3φ)
Enclosure Type
0 = protected chassis IP20
Output Current
1P4 = 1.4 A (0.25 HP (0.2 kW) @ 230 V)
1P5 = 1.5 A (0.5 HP (0.4 kW) @ 460 V)
2P5 = 2.5 A (1 HP (0.75 kW) @ 460 V)
2P6 = 2.6 A (0.5 HP (0.4 kW) @ 230 V)
3P0 = 3.0 A (0.75 HP (0.55 kW) @ 230 V) 010 = 10 A (3.0 HP (0.4 kW) @ 230 V)
3P8 = 3.8 A (2 HP (1.5 kW) @ 460 V)
4P0 = 4.0 A (1.0 HP (0.75 kW) @ 230 V)
L = Keypad
D = DeviceNet
U = 60 Hz (Default)
]
5P0 = 5.0 A (1.5 HP 1.1 kW) @ 230 V)
5P5 = 5.5 A (3 HP (0.4 kW) @ 460 V)
7P1 = 7.1 A (2.0 HP (1.5 kW) @ 230 V)
8P6 = 8.6 A (5 HP (3.7 kW) @ 460 V)
015 = 15 A (5.0 HP 3.7 kW) @ 230 V)
Figure 1.1 – Model Number Structure
C
HAPTER
Introduction
S12 - 2 0 1P4 L U
English
1
1-1