By the system setup menu
1
Press (SYSTEM SETUP) while the unit is
off.
The system setup item appears on the main
unit.
2
Press M/m to select "POS TUNE," then
press (ENTER).
3
Set the distance between your
listening position and each speaker.
To adjust the distance, press M/m.
The distance is adjustable in 2 cm (
steps, between 0 and 400 cm (0 and 13
To switch the speaker, press </,.
The speaker switches as follows: FL (Front
Left) t C* (Center) t FR (Front Right) t
SR (Rear Right) t SL (Rear Left).
* Appears only when a center speaker is
connected and set to "C ON" (page 12, 38).
4
Press (ENTER).
The setting is complete.
Tip
The setting in visual setup will switch the setting in
system setup automatically, and vice versa.
With the main unit
Rotate the volume control dial instead of pressing M/
m, press the volume control dial instead of </, or
(ENTER).
Customizing the equalizer curve
— EQ7 Tune
"CUSTOM" of EQ7 allows you to make your
own equalizer settings. You can adjust the level
of 7 different bands: 62 Hz, 157 Hz, 396 Hz,
1 kHz, 2.5 kHz, 6.3 kHz, and 16 kHz.
1
During playback/reception, press
(SYSTEM SETUP).
The system setup item appears on the main
unit.
13
/
in)
16
1
2
/
ft).
Press M/m to select "EQ7 TUNE," then
10
press (ENTER).
3
Press M/m to select "CUSTOM," then
press (ENTER).
4
Adjust the level of each frequency.
To adjust the level, press M/m.
The level is adjustable in single steps,
between –8 and +8.
To switch the frequency, press </,.
To restore the factory-set equalizer curve,
press and hold (ENTER).
5
Press (ENTER).
The setting is complete and the display
returns to normal play/reception mode.
Note
EQ7 is deactivated while the karaoke mode (page 31)
or CSO (page 35) is activated, or "SUPER AUDIO CD
MODE"/"SA-CD MOD" is set to "HQ" (page 42, 46).
Tip
Other equalizer types are also adjustable.
With the main unit
Rotate the volume control dial instead of pressing M/
m, press the volume control dial instead of </, or
(ENTER).
37