Troubleshooting - Roca MULTICLIN PREMIUM RF Manual De Instrucciones

16
Issue
No working
Low water flow or pressure
Nozzle do not function properly
Nozzles fail to retract
Washing feature does not work
or fails to spray
Product shuts off during use
Seat not heated
Water not heated
Dryer not working
Remote control failed
Other

TROUBLESHOOTING

Probable cause
1.Disconnected/ no power supply
2.No electrical power supply
3.Product is power off.
1. Clogged filter
2. twisted hose
3. Nozzle cap is stuck
1. Nozzle are dirty
2. Clogged filter
3. Water pressure is too low
1. Nozzle are dirty
1. User not properly seated
1. Washing time exceeded 5
minutes
2. Power failure
1. Seat temperature set to off
1. Water temperature set to off
1. Dryer only operates when
activated
1. Remote control can't receive
2. Battery is low power
3. Location of remote control is
not suitable
Please contact with dealer or call at 902400423 (Only in Spain )
Solution
1.Connect the product
2.Check there's a 230V~signal
with another product
(such us hairdryer)
3.Push the power button
(on/off auxiliary control).
1. Clean water filter
(See page14)
2. Straighten the hose
3. Clean nozzle cap
1. Clean the nozzle(See page14)
2. Clean the filter(See page14)
3. Adjust water pressure
1. Clean the nozzle
(See page 14)
1. Adjust your sitting position
1. Repeat cleaning function
2. Check power and / or unplug
the cord to reset
1. Reset heated seat temperature
(See page 11)
1.Reset heated seat temperature
(See page 10)
1. Sit on product to operate dryer
(See page 11)
1. Something or somebody
disturb the receiving from the
remote control
2. Replace the battery
3. Change or move the location
of the remote control