Grounding Instructions - Roca MULTICLIN PREMIUM RF Manual De Instrucciones

02

GROUNDING INSTRUCTIONS

The plug must be plugged into an outlet that is properly installed grounded. In the event of an electrical short
circuit, grounding reduces the risk of electric shock .
The electrical outlet, which must be a 220V-240V 50Hz, and at least a 10-Amp grounded outlet,
should be located on the wall within reach of the unit's power cord.
A Ground Fault Interrupter residual current device (RCD) should be installed on the circuit supplying power to
the unit. According to each local regulation.
DANGER
- Improper use of the grounding plug can result in a risk of electric shock. If repair
or replacement of cord or plug should be done by authorized personel. Make sure grounding is correct.
Check with a qualified electrician or serviceman if the grounding instructions are not completely
understood, or if in doubt as to whether the product is properly grounded.
Do not use extension cable.