4.3
Getting Started
The instrument is switched on and off using the green power button
found on the lower right side of the front panel.
When the unit is first switched on it will display the opening screen giving
the software version, the currently selected cable type/Velocity of Propa-
gation, and remaining battery capacity.
4.4
Set-up Mode
Hold the
TDR /
• Measurement units can be set to Feet or Meters
• Languages can be set to: English, Français, Deutsch, Español or
Italiano
• A user programmable library is available to store up to 15 custom-
ized settings
• The display contrast can adjusted
Press the
TEST /
Press the
Vp
Press the
TDR /
NOTE: When the Fault Mapper is turned off, it will remember the
current set-up parameters. This feature is useful in the situation
where the operator is performing many tests on the same type of
cable.
8
AEMC Instruments
Fault Mapper V3.1B
Romex 14/2
Vp=66%
button, then press the
>
Feet
Eng (USA)
Edit Library
Contrast
button to move the line selector (>) down the screen.
or
button to change the setting of the line selected.
Vp
button again to save changes and exit set-up mode.
button to enter Set-up mode.
TEST /
Fault Mapper Model CA7024
,