AEMC Instruments CA7024 Manual De Instrucciones página 16

If the cable to be tested is not listed in the library, or a different Vp is
required, continue pressing the
Vp will be displayed with a value, which can be selected from 1 to 99%. If
the Vp value is not known, see § 4.9.
NOTE: When the Fault Mapper is turned off, it will remember the
last selected Cable Library or Vp setting. This feature is useful in the
situation where the operator is performing many tests on the same
type of cable.
14
button, past the top of the library.
Vp
AEMC Instruments
Fault Mapper V3.1B
Vp=95%
Fault Mapper Model CA7024