Connecting To An Av Receiver Or Amplifier; Audio Signals That Can Be Output From This Unit's Hdmi Out Terminal; Connecting The Fm Antenna; Connecting Usb Storage Devices - Pioneer X-SMC5-K Manual De Instrucciones

02 Connections

Connecting to an AV receiver or amplifier

This unit's rear panel
Match the direction of
the plug to the
terminal and insert
straight.
TV
Audio signals that can be output from this
unit's HDMI OUT terminal
• 44.1 kHz to 96 kHz, 16-bit/ 20-bit/ 24-bit 2-channel linear
PCM audio (including 2-channel downmixing)
• Dolby Digital 5.1-channel audio
• DTS 5.1-channel audio
• MPEG audio
• Manufactured under license from Dolby Laboratories.
"Dolby" and the double-D symbol are trademarks of
Dolby Laboratories.
Note
1 To ensure optimum reception, make sure the FM antenna is fully extended and not coiled or hanging at the rear of the unit.
2 • To use services such as Internet radio or automatic clock sync functions, you must conclude a contract with an Internet service
provider.
• Photo or video files cannot be played back.
• With Windows Media Player 11 or 12, you can even play back copyrighted audio files on this unit.
8
En
HDMI
OUT
ANTENNA
LAN VIDEO DC IN
FM75
(10/100) OUT 19 V
HDMI cable
(commercially
available)
To HDMI input
terminal
AV receiver or
From HDMI
amplifier
output terminal
HDMI cable
To HDMI input (commercially
terminal available)

Connecting the FM antenna

Connect the FM antenna plug onto the center pin of the FM
1
antenna socket.
FM wire antenna (supplied)
This unit's rear panel

Connecting USB storage devices

This unit's front panel
USB storage device
(commercially available)
Connecting to the network through the
LAN interface
By connecting this unit to the network via the LAN interface,
you can play back audio files stored on components on the
network, including your PC, and listen to Internet radio
2
stations.
Connect the LAN terminal on this unit to the LAN terminal on
your router (with or without the built-in DHCP server function)
with a straight LAN cable (CAT 5 or higher). Also wireless
connection to the network is possible.
Turn on the DHCP server function of your router. If your router
does not have a built-in DHCP server function, you have to set
up the network manually. For details, see page 36.
ANTENNA
LAN VIDEO DC IN
FM75
(10/100) OUT 19 V