Checking Wear; Transport And Storage - Husqvarna K970 II Ring Manual De Instrucciones

Checking wear

As the blade is used the inside diameter and the groove
in the drive wheel become worn.
The ring cutter will also work well in the future if:
• the drive wheel is not too worn
1) New
2) Worn
• the guide rollers are not too worn
1) New, 3 mm (0.12'')
2) Worn, ≤ 1,5 mm (0.06'')
• adjustment between the rollers and blade is correct.
See instructions in the section "Assembling and
adjustments".
The roller setting should be checked twice during the
life of the diamond blade, once after fitting the blade
and when the blade is semi worn.

Transport and storage

• Store the blade in a dry place.
• Inspect all blades for transport or storage damage.
CUTTING BLADES
–
English 9