Method Parameters; Method Editing And New Method; Standard Methods - Xylem SI Analytics TITRONIC 500 Manual De Instrucciones

Chapter 4 Method Parameters
85
4

Method Parameters

From the main menu shown in (Fig. 43/Fig. 24), <EDIT>/<F3> will take you to the method parameters:
Fig. 47

4.1 Method editing and new method

If you select <edit method> or <new method> you will be taken to the modification or new creation of a method.
Selecting <new method> will always lead to the prompt for the input of a method name (Fig. 48). This prompt will
not appear in the case of the modification of an already created method.
Fig. 48
The method name can contain up to 21 characters. Special characters are also possible. If no keyboard is
connected, the method name being displayed has to be adopted (in the present case „Method 04"). Numbering of
methods will occur automatically. Press <OK>/<ENTER> to confirm the input. The method name can be changed
at any time. Please continue at this point with Chapter 4.5.

4.2 Standard Methods

®
The <Standard methods> item of the TITRONIC 500 contains a series of ready-made standard methods which
can be conveniently selected (Fig. 49).
Fig. 49