Operation; To Start To Use Husqvarna Connect; To Adjust The Seat; To Fill Fuel - Husqvarna R 318X Manual De Usuario

Ocultar thumbs Ver también para R 318X:
Tabla de contenido
Idiomas disponibles

Idiomas disponibles

8. Hold the front edge of the cutting deck with two
hands and pull until it stops.
9. Lift the service lock to vertical position.
Introduction
WARNING: Before you operate the product,
you must read and understand the safety
chapter.

To start to use Husqvarna Connect

1. Download the Husqvarna Connect app on your
mobile device.
2. Register in the Husqvarna Connect app.
3. Do the instruction steps in the Husqvarna Connect
app to connect and register the product.

To fill fuel

WARNING: Gasoline is very flammable. Be
careful and refuel outdoors (see
on page 11 ).
WARNING: Do not use the fuel tank as a
support area.
CAUTION: Incorrect type of fuel can result in
engine damage.
14
10. Lift the front of the cutting deck until the service lock
touches the frame and pull the cutting deck out.

Operation

The engine runs on gasoline with a minimum octane
rating of 91 RON (87 AKI), not mixed with oil. We
recommend biodegradable alkylate gasoline. Do not use
gasoline that contains more than 10% ethanol.
Do a check of the fuel level before each use and
refuel if necessary.
Do not fully fill the fuel tank. Keep a space of a
minimum 2.5 cm.

To adjust the seat

1. To adjust the seat forward and rearward, put your
feet on the footrest plates.
Fuel safety
2. Push the lever below the front edge of the seat, to
the side.
3. Move the seat to the position that is correct for you.
WARNING: The lock mechanism
can cause injury to fingers if you do
not operate it carefully. Hold the
front edge of the cutting deck with
two hands when you continue to the
next step.
WARNING: Do not adjust the seat during
operation of the product.
838 - 005 - 21.10.2019
Tabla de contenido
loading

Este manual también es adecuado para:

R 320x awd

Tabla de contenido