Technical data
Electric motor
Type
Power
Voltage range
Lubrication system
Type of oil pump
Oil tank capacity, litre
Weight
Chainsaw without bar and chain, empty chain oil tank, kg
Noise emissions (see note 1)
Sound power level, measured dB (A)
Sound power level, guaranteed L
Sound levels (see note 2)
Equivalent sound pressure level at the operator's ear, dB(A)
Equivalent vibration levels, a h (see note 3)
2
Front handle, m/s
2
Rear handle, m/s
Respective uncertainty K, m/s
Chain/bar
Recommended bar lengths, inch/cm
Usable cutting length, inch/cm
Type of drive sprocket/number of teeth
Maximum chain speed, m/s
Note 1: Noise emissions in the environment measured as sound power L
Annex V.
Note 2: Equivalent sound pressure level, according to ISO 22868, is calculated as the time-weighted energy total for
different sound pressure levels under various working conditions. Typical statistical dispersion for equivalent sound
pressure level is a standard deviation of 2,5 dB (A).
Note 3: Vibration level, according to EN 60745-2-13. Reported data for vibration level has a typical statistical dispersion
(standard deviation) of 1,5 m/s
and recommended chain type.
Warning! The vibration emission during actual use of the power tool can differ from the declared
!
total value depending on the ways in which the tool is used. Operators should identify safety
measures to protect themselves that are based on an estimation of exposure in the actual
conditions of use (taking account of all parts of the operating cycle such as the times when the
tool is switched off and when it is running idle in addition to the trigger).
120 – English
TECHNICAL DATA
dB (A)
WA
2
2
. Declared vibration data from measurements when the machine is fitted with a bar length
418EL
Series AC Motor
1800W
230-240V
Automatic
0,20
4.7
101,9
103
90,8
5,2
3,9
1,5
14/35
12.5/32
Spur/6
14.5
in conformity with EC directive 2000/14/EC
WA
420EL
Series AC Motor
2000W
230-240V
Automatic
0,20
4.7
101,9
103
90,8
5,2
3,9
1,5
16/40
14/35.5
Spur/6
14.5