Preparing hot water
Steam for heating
drinks
q Push down the sleeve a on nozzle.
q Place an appropriate cup under the nozzle.
q Rotate function selector to 0 and fill the cup.
d
Avoid the risk of scalding!
When the function selector is set
to 0, the nozzle may spurt slightly.
Escaping water is very hot. Do not
touch nozzle or direct at people!
q End the process by rotating the function selector
back to U position.
q Push up the sleeve a on nozzle
q Immerse nozzle deep into the liquid which
is to be heated.
q Slowly rotate function selector to =.
The appliance now heats up for approx.
20 seconds. Then the liquid is heated.
d
Avoid the risk of scalding!
When the function selector is set
to =, the nozzle may spurt slightly.
Escaping steam is very hot. Do not
touch nozzle or direct at people!
q End the process by rotating the function selector
back to U position.
Note: When nozzle has cooled down, clean
immediately.
Dried residue is difficult to remove.
WARNING
WARNING
d
d
15