Machine´s Safety Equipment; General; Hand Guard; Throttle Trigger Lockout - Husqvarna K6500 II Chain Manual De Instrucciones

General

WARNING! Never use a machine that has
!
faulty safety equipment! If your machine
fails any checks contact your service
agent to get it repaired.
To prevent accidental starting, the steps
described in this chapter must be
performed with the motor off and the
power cable removed from the socket, if
not otherwise stated.
This section describes the machine's safety equipment,
its purpose, and how checks and maintenance should be
carried out to ensure that it operates correctly.

Throttle trigger lockout

The throttle trigger lockout is designed to prevent
accidental activation of the throttle.
When you press the lock (1) into the handle (i.e. when you
grasp the handle) it releases the throttle control (2).
1
2
When the grip on the handle is released, both the throttle
and throttle lockout return to their original positions. In this
position, the machine will stop and the throttle will be
locked.
Checking the throttle lockout
• Make sure the power trigger is locked when the power
trigger lock is in its original position.
• Press the throttle lockout and make sure it returns to
its original position when you release it.
6 – English
MACHINE´S SAFETY EQUIPMENT
• Check that the power trigger and the power trigger
lockout move freely and that the return spring works
properly.

Hand guard

WARNING! Always check that the guard
!
is correctly fitted before starting the
machine.
The hand guard prevents hands from coming into contact
with the moving cutting chain, for example, if the operator
loses grip on the front handle.
Checking the hand guard
• Check that the hand guard is not damaged. Replace
the guard if damaged.
Cover, spray guard and rear right hand
guard
The cover and spray guard provides protection against
contact with moving parts, ejected debris, thrown water
and concrete slurry. The spray guard and rear right hand
guard are also design to catch the diamond chain if it
snaps or jump of.
Checking the cover, spray guard and rear right hand
guard
• Ensure there are no cracks or holes from slurry
blasting in the cover and guards. Replace cover or
guards if damaged.